Reliable I60 Specifiche Scaricare il pdf (Pagina 9)

I60 Owner’s Manual Ver 1.2

for their reliability and durability. Hence, your vacuum tube amplifier should

give you years of trouble free service and magical musical moments.

Controls

Power Switch

Turn the switch clockwise to turn the amplifier on. The blue power indicator

will light up, and the tubes will begin to warm up. A soft start circuit is

incorporated for extended tube life and to prevent a turn-on thump at the

speakers.

Within a few seconds, you will hear a couple of soft clicks, and the valves will

begin to glow a beautiful soft orange color. Do not turn on the amplifier

without speakers connected. Also, turn on the source components before

turning on your amplifier. Otherwise, some components might produce turn-

on “thumps” which could be harmful to your amplifier, your loudspeakers or

your ears.

Turn the switch counter clockwise to turn the amplifier off. About 30 seconds

after turning the unit off, the tubes will lose the soft orange glow. The valves

will still be hot and could burn your fingers if you touch them. Leave the

amplifier turned off for at least 30 minutes before cleaning or touching the

tubes.

It is normal for a vacuum tube amplifier to run quite warm. If used for

prolonged periods, the chassis will be hot to the touch. If you are using the

included tube cage, that cage will also be hot.

Keep young children away from vacuum tube amplifiers. The hot valves

could burn their fingers.

Volume Control

This knob is used to adjust the output volume. Turn the knob clockwise to

increase the sound level, and counter-clockwise to decrease the sound

level. When turning the unit on or off, it is recommended that the volume be

turned to minimum (fully counter-clockwise).

The volume control is a precision discrete resistor stepped attenuator.

Hence, do not attempt to set the volume between clicks!

Selector Switch

Use this knob to select the input source to be listened to. There are four

selection positions. While they are labeled Tape, CD, Aux, and Tuner, they

can be used for any line-level source. There is no quality difference between

CD, Tape, Aux, and Tuner inputs. They all have shielded high resolution

solid-silver cabling.

1 2 3 4 5 6 7 8 9 10 11 12

Nessun commento

Reliable I60 Specifiche Pagina 9